Hi everyone! This is Lindi, visiting again from Love Create Celebrate! I’m really excited to show you how you can make your own Rustic Home Sign. You’ve probably seen something similar in a home decor store, but didn’t want to pay big bucks for one. You’re in luck, I’m going to show you how to make your own Rustic Home Sign using a scrap of wood you might have sitting around. If your scrap wood isn’t wide enough, you can glue two pieces together.
- 1×6″ wood board (as big as you want your sign to be)
- Pencil or stencil
- Scroll Saw
- Wood Stain
Cut your wood board down to the approximate size that you want your sign to be. Mine was about 12″ long. Make sure the edge that the sign will sit on is flat. If not, sand down that edge. Sand the front and back of the board (especially if you glued two boards together.)
Trace the word “Home” on your board. Draw it by hand or transfer from a print out. Make sure that all of your letters are connected and that the bottom of the letters run off the bottom of the board (this way it will sit flat).
Using your drill, drill holes into the centers of the “o” and “e” that are enclosed. Use a scroll saw to cut around the word and within the letters. Use a very thin blade to allow you to navigate the edges and curves.
When you are done cutting, double check that your piece sits flat. Use your sandpaper to sand all edges. (Folded up sandpaper and a nail file will help you get into the curves.)
Stain your pieces using your favorite wood stain. (I used my well-loved can of grey.)
Let it dry, and display it proudly in your home!
I love how this piece turned out.
I can see myself using this piece on my mantle or any of the many shelves in my home!
I may have to make a few more or make some with different words.
For more DIY decor inspiration visit Love Create Celebrate.
Pin for later!