Posts

Get all your gardening tools in one spot with this hanging garden tool organizer!

Get all your gardening tools in one spot with this hanging garden tool organizer!

Hi again, I’m Vineta from The Handyman’s Daughter and I’m back this month with a smart idea for organizing your garden tools. My garden tools were always scattered throughout the shed making it hard to get started on a gardening project. Thanks to this Hanging Garden Tool Organizer, there’s now a place for everything.

Seattle’s Spring got off to a slow start, so as soon as the sun came out I was anxious to get new plants in the ground. I recently built a garden trellis and it was time to add climbing vines! Unfortunately, when I opened the garden shed, I faced this disaster . . .

Our garden tool shed was a disaster! But with my new hanging garden tool organizer, small tools each have their own space.

Toys, leaves, and even my husband’s long lost bike helmet littered the floor. Sadly half the hooks on the pegboard walls were empty. Obviously I needed a better organizational system before someone got a rake to the head!

I cleared everything out (including too many spiders) and took inventory. Toys were relocated to the new storage bench I built for the backyard; plastic pots were recycled; and broken tools were tossed. Bigger shovels and rakes went back on the hooks, but I needed to create a home for the small hand tools and gloves.

My new hanging garden tool organizer created a home for all these garden tools, and more!

I didn’t want to throw all the smaller items in a bucket where they would get lost again. An inexpensive shoe organizer was the perfect solution. Adding labels to each pocket helps keep everything in its place.

Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

These are all the supplies you'll need to make a hanging garden tool organizer!

How to Make a Hanging Garden Tool Organizer:

Start by measuring the size of one pocket of the shoe organizer. (Mine are a little over 4 inches wide and 7 inches long.) If you don’t want to use all the pockets, feel free to trim off the extras. I only needed a dozen for all my small items, so I cut off the bottom two rows.

If there are more pockets than you have tools, trim off the bottom rows of your organizer.

Make a list of all the tools you want to store in the pockets. Using the software that comes with your vinyl cutting machine, create labels with text or images. (Mine are a combination of this design and clip art I found online.) Don’t forget to mirror the image if it has text!

Make sure to create a mirror image if you're using text with iron-on vinyl!

Place the iron-on vinyl onto the sticky mat (shiny side down) and feed the mat into the machine. Send your design to cut. Cut apart the individual designs and weed out the negative space.

Each design corresponds to an item to be stored in the hanging garden tool organizer.

Place each design (plastic side up) on a pocket of the shoe organizer. It’s a good idea to keep heavier tools like the trowel and pruning shears at the bottom and lighter items like seeds and gloves at the top.

When using iron-on vinyl, make sure to apply it with the clear plastic side up.

Set your iron to the highest setting. Lay a piece of cotton cloth (a thin tea towel or even a t-shirt is fine) on top of your design. Iron it in place. Move the iron around over the design for 30 seconds to adhere the vinyl to the pocket. Be careful not to leave the iron in one spot too long or you risk scorching the fabric.

Iron your design to the pocket of your hanging garden tool organizer.

Your design is adhered properly when the clear plastic peels away cleanly. If it still sticks, iron more!

You know your design is ironed onto the fabric well when the plastic peels up easily.

Once the iron on is cool, move on to the next one. I had never used iron-on vinyl before and was pretty impressed at how flexible it is. The vinyl looks like it would peel up easily, but it adhered firmly.

The iron-on vinyl is more flexible than it looks!

Hang your organizer. My organizer came with over-the-door hooks, but they were too big for the louvered doors of my shed. I used hooks to hang it on the pegboard wall. Time to fill up your organizer.

Get your shed or garage organized with this hanging garden tool organizer!

The heavier tools flopped forward so I stapled the fold of the pockets to the pegboard to keep them straight.

If the tools fall forward too much, staple the fold of the pocket to the wall to keep them straight.

No more hunting for that matching glove! They always have a home now.

No more hunting for that missing gardening glove! Matching pairs fit perfectly in the pockets of this hanging garden tool organizer.

Now my garden shed is neat and organized! I can instantly see what tools are missing and hunt them down in the garden before they turn to rust. The images on the garden tool organizer make it easy for even the little kids to help with clean up.

Need more garden tool storage ideas? I’ve found some genius garden tool storage ideas, including the inspiration for this project, here.

Get organized with these 10 genius garden tool storage ideas!

Thanks for reading and don’t forget to check out my blog at The Handyman’s Daughter for more projects!

~ view more of Vineta’s projects ~