We just got back from a short trip to Vienna, Virginia to visit my family for the holidays. When we arrived, my mom had left me a note in the bathroom we were using.
Here it is:
My mom, she’s so cute, doesn’t she know that this sign taunted me the whole visit?
Besides, what kind of daughter would I be if I left this minor repair to a plumber? Puh-lease!
So, here was the deal with the hair clip in the sink. It was her way of holding the stopper up because the rod inside the sink had rusted and broken off. (Pretty creative in my opinion.)
But not the real fix for a sink stopper that would not stay up.
Let’s back up before I show you how to repair the stopper. Thank you to Dvorty Girl for the excellent illustration above that she posted on WikiHow.com.
Sink parts:
- Drain Down Rod
- Joint Clamp Clip
- Horizontal Rod
- Nut
- Ball, Rod, Nut & Gasket
- Stopper Notch
- Pop Up Drain Stopper
Materials:
(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)
Universal Pivot Ball Replacement Kit
Pliers (maybe)
Repairing a Pop Up Sink Drain Instructions:
1. Clear out enough room so you can work under the sink. (Okay, my mom is going to kill me for showing you her cluttered sink vanity. But, who’s sink vanity doesn’t look like this?! Please leave a comment and tell her that she’s not the only one!)
2. Lay down some towels to cushion the edge of the vanity (or your back, rib cage or hips will be in screaming pain.)
3. Locate the (3)horizontal rod and (5) nut at the back of your drain that holds the (5) ball, rod & gasket.
4. Unscrew the (5) nut with your fingers or use pliers if it is really tight. Pull out the ball and gasket.
5. To release the (3) horizontal rod from the (1) down rod, squeeze the (2) joint clamp clip between your fingers and slide it off the end of the horizontal rod.
6. Lay out your old pieces to assess the damage. You may or may not need a new gasket (which is sold separately.) This one was broken and needed replacing.
7. Match the old pivot ball with the new ones in the kit. Be sure to choose the one that is exactly the same size. Thread the (5) new ball onto the new (3) horizontal rod.
8. Next thread the new gasket onto the horizontal rod and then the nut.
9. Next feed one end of the (2) joint clip clamp (the kit I bought contained two white stoppers instead of a joint clip clamp). Only add one side or one stopper at this point.)
10. Feed the (3) horizontal rod into the (1) down rod.
11. Line the other end of the (3) horizontal bar up and slip the ball joint into the hole at the back of the drain. Ideally the horizontal bar will be parallel to the floor, but you may have to make some minor adjustments at the end.
12. Screw the nut back onto the drain making sure the ball joint and gasket are lined up properly.
13. Now add the second stopper or the other end of the (2) joint clamp clip to the back of the (3) horizontal rod.
14. Look inside the drain, and notice the post end of the (5) ball joint inside the drain.
Pull up on the (1) down drain rod and make sure that it moves up and down freely and the post in the drain moves as well.
15. This next step requires a little patience, so put your patience cap on. Feed the drain stopper back into the drain. You want the end of the stopper to be at a 90 degree angle from the ball joint post as show below.
Gently rotate the stopper 90 degrees until the end of the stopper hooks the post.
16. Once the stopper has been properly rotated and hooked onto the ball joint post, test your sink by pulling up and own on the (1) drain down rod.
And you are done!
Pretty Handsome Guy thought it would be funny to re-arrange the letters in the sign.
And just to prove to you that my Mom can also be handy, this is a photo I found of her from the 1970’s when my parents were building my childhood home.
Next time your drain stopper is broken, I hope you will put off calling a plumber and fix it yourself!
You might also like:
Thank you. Perfect illustration! It’s much better than written instructions. I think I can do this now!
Thank you for woman instructions and pictures. After reading and seeing, I said, “I can do that, ” and I did in about 10 minutes.
Thank you for your simple, easy to follow instructions!
I just fixed my sink in under 15 minutes thanks to your tutorial. Thank you so much!
Hooray! So glad to hear it Rachel.
This tutorial saved me $400+ in plumber bills. THANK YOU! great stuff.
Awesome! Glad to hear it Ken!!!
I have been trying this repair all weekend (independently of finding your site), and I can’t figure out how to get water to stop leaking out around the ball joint. I actually rejected that universal kit because it didn’t have that little gasket and I couldn’t find them anywhere separately. I found a different kit that had a gasket in it but that one keeps leaking too. Any suggestions?
Samantha, you might need a whole new drain assembly. You can unscrew the drain from the collar around the stopper. And then loosen the large nut above the PVC p-trap. It’s not too difficult to replace AFTER you get the drain out. That can prove a tad tough, if it is old and has been there a while. Try googling replacing sink drain.
This is a real handy article. Can you also please list of each item name and where I can get it?
I am really going to try this for this weekend, wish me luck! :-))
Thank you. Thank you. Thank you. The pictures — awesome.
I every time spent my half an hour to read this
blog’s articles or reviews every day along with a mug of coffee.
I did it! I did it! I did it!!!
Thanks!
hi, thank you for such an informative piece, i got mine all fixed up! Bought a replacement kit, but small gaskets and used teflon tape to rig it up.
Thank you for taking the time to write this and put it online with pictures and drawings.
sean
Perfectly understandable directions and illustrations! Thank goodness I found your post after so many I found too difficult to follow. I will attempt this on Monday.
Your directions were wonderful! The pictures really helped. I had to cut off the end of the rod because of some pipes at the back of my sink cabinet, but the stopper is working find now. Without your step-by-step directions I would have had to hire someone to do a relatively simple job. I am a 72 year old woman.
You go girl!!! I’m so glad you took the time to comment and so glad you fixed your sink. I gave you a high five and shout out on my Facebook page: https://www.facebook.com/PrettyHandyGirl/posts/420556131362211
I have fixed some plumbing problems in the past so my husband calls me Josephine. She was on a commercial for Draino or something years ago. Anyone remember her? So the stopper in the sink broke and we were stumped. My husband took it apart, but we were stumped. This is perfect so now Josephine can take over I guess. Love the pictures. Thanks for the detailed posting. Can’t wait to use this to get it fixed.
I need to do this, so I am bookmarking for future project. All the pictures are soooo helpful. Thanks.
Mine just broke, and this information gives me the courage to try it myself! Thanks!!