How to Make Your Own Piping


Back when I showed you my screen porch tour, I told you it really wasn’t 100% finished. Why? Well, I really wanted to sew a cushion for the garden bench.

As I was looking for piping for my cushion, I was getting VERY disappointed! Why? Two reasons:

  1. I couldn’t find a simple piping cord in a white color.
  2. Anything that might work (off-white) was VERY expensive!

So, I decided to teach myself how to make my own piping for the cushion. I can tell you now, I WILL NEVER BUY PIPING AGAIN! It was that easy.

Materials:

  • Cotton rope
  • Inexpensive cotton/poly blend white fabric
  • White thread
  • Scissors
  • Pins
  • Sewing machine with a zipper foot
  • Iron

Tutorial:

1. Start by measuring your fabric and put a snip at 3″.

2. Tear the fabric along the length. The strip should stay approximately 3″ along the rip.

3. To add more length, cut two pieces at a 45Ëš angle.

4. Pin the two angled ends together as shown (at a 90Ëš angle).

5. Stitch the two pieces together along the angled edge.

6. Open up the fabric and press the seam.

7. Lay your rope in the center of the fabric.

8. Line up the raw edges and pin next to the cord.

9. Using your sewing machine and zipper foot, stitch very close along the edge of the rope but not on top of it.

And this is your finished product! I actually like how the thin fabric shows the spiral pattern of the rope through it.

Now, head on over to my tutorial for sewing the bench cushion cover!

52 replies
« Older Comments
  1. Brenda
    Brenda says:

    Do you have a problem with mildew and your outdoor cushions. I’ve been afraid to put pillows or cushions outside on my porch in this humid, humid southern weather.

    Reply
  2. Beth
    Beth says:

    Thank you soo much! I just used your tutorial and made a great (for a novice) cushion cover for an antique bench that was gifted to me.

    Reply
  3. Joy
    Joy says:

    Great tutorial, easy to read through it. Now in the process of making seat covers. Question: What size cord did you use? Cord #5 is .5 inch and Cord #4 is .38 inch. Thanks

    Reply
  4. Trish Davenport
    Trish Davenport says:

    This made it all clear for me. Making piping has always been something I tried and never got quiet
    right. I think I was attaching the new lengths of material all wrong. Thanks for your great help.

    Reply

Trackbacks & Pingbacks

  1. […] Piping trim (tutorial for making your own less expensive piping) […]

  2. […] Piping trim (tutorial for making your own less expensive piping) […]

  3. […] Piping (here’s the tutorial to make your own piping) […]

  4. […] Piping (tutorial to make your own piping) […]

  5. […] 5 – 6 yards of Piping trim (optional). Tutorial to Make Your Own Piping […]

« Older Comments

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.