, , , ,

How to Make a SMOOTH Chalkboard Wall {For Imperfect Walls}

Have you ever wished you had a chalkboard wall in your home? But, those bumpy textured walls or damaged drywall are not smooth enough? Well, today I’m about to rock your world by showing you How to Make a SMOOTH Chalkboard Wall For Imperfect Walls!

SMOOTH Chalkboard WallHow to Make a SMOOTH Chalkboard Wall {For Imperfect Walls}

I feel your pain! We have a little wall between the kitchen and the dining room that was the perfect spot for a chalkboard wall. But the drywall was ripped from the removal of the beadboard. Sure, I could have ripped out the drywall and added new, but honestly I was beyond drywall in our kitchen renovation process and I didn’t want to back track.

I’m cringing at the photo below because the pantry looked like that long after we finished the kitchen. Luckily, I finished the pantry last year. You would not recognize it as the same space!

SMOOTH Chalkboard Wall

But enough about the kitchen renovation. I came up with a new solution for making the wall smooth enough for a chalkboard! You could also use this technique if you wanted to remove the chalkboard in the future if you live in a rental and aren’t allowed to paint walls.

Ready? Alright, let’s get this chalkboard party started now!

SMOOTH Chalkboard Wall Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Optional (if you have an outlet or switch to work around):

SMOOTH Chalkboard Wall Instructions:

Cut Your Pieces:

Cut your masonite to size. (Or bring your measurements and ask the store to cut it to size for you.)

SMOOTH Chalkboard Wall

Use a jigsaw, circular saw, table saw, or other power saw to cut each panel. Dry fit the panels on the wall and make any adjustments as necessary.

SMOOTH Chalkboard Wall

Plan your sections:

Use one large sheet to cover as much wall as possible. The fewer the seams the better.  Plan to hang a small piece for over any doors. (Note: The skinny little section on the left side of the door was left blank, no one has noticed after it was painted black.)

SMOOTH Chalkboard Wall

If you have an outlet or light switch, you need to cut a hole in the masonite to accommodate them.  To cut the hole, smear lipstick around the edges of the box (or you can smear it on an outlet as shown in this post.) Hold the masonite panel in place and push against the outlet box. When removed you should  see the lipstick impressions. (I used an extra outlet box to trace around for lines that were easier to see.)

marking_outlet_location_lipstick

Drill holes in the corner of the outlined shape. Use a jigsaw to cut from hole to hole. Test fit your panel.

drill_holes_for_outlet

Install Panels:

Time to hang the masonite panels. For a permanent hold, use construction glue and then secure with finish nails. If you want to be able to remove the panels later, skip the adhesive and use only finish nails.

glue_and_nail_board

Fill nail holes and seams with wood putty. Lightly sand smooth after the putty has dried.

SMOOTH Chalkboard Wall

Prime and Paint:

Using a foam roller, prime the chalkboard with tinted primer (ask your paint department to add as much black as they can to a small can of primer. This will reduce the number of coats of chalkboard paint needed.) My Lowe’s store was able to produce a 50% gray color.

SMOOTH Chalkboard Wall

After the primer dries, lightly sand, and wipe clean. It’s important to sand between coats because this will give you the smoothest results and it gives a little tooth for the next layer to adhere to. You’ll need at least two coats of chalkboard paint.

SMOOTH Chalkboard Wall

Seasoning the Chalkboard:

After the paint has dried thoroughly, enlist the help of your son or daughter to help season the chalkboard (rub chalk on its side over the entire surface.)

SMOOTH Chalkboard Wall

Then wipe off the chalk using a completely dry rag.

SMOOTH Chalkboard Wall

There is beauty in the gray movement on a chalkboard wall, wouldn’t you agree?

SMOOTH Chalkboard Wall

Don’t forget to add  your outlet covers. You can paint them with chalkboard paint to match the wall.  (Important: Do not paint the actual outlet, this violates electrical codes.)

chalkboard_open_dining_rm

Christen your chalkboard with drawings or your to do list.

kitchen_to_do_list

Within two hours I had to erase the list because I was feeling a little stressed by all the things I needed to complete in our kitchen renovation.

This fun quote was a lot less stressful!

SMOOTH Chalkboard Wall

We added a chalkboard calendar a few years ago and this has been the best way for our family to stay organized (also the kids love seeing what’s coming up each week.)

2014 chalkboard calendar wall

What would you use a chalkboard wall for? I’d love to hear your ideas.

PHGFancySign

58 replies
« Older Comments
  1. ryanjsocha
    ryanjsocha says:

    Btw REALLY appreciate this article. It’s assuring to see so many renovators & creators out there! =)

    This is pretty intensive. heh (for me). But obviously a job worth doing is worth doing well. I have those sliding closet doors right next to my desk/work station. I think they’re some artificial flimsy wood paneling? But the surface is pretty smooth.

    I naively just painted directly onto it, applying 2 coats of chalkboard paint with a foam roller, thinking the 2nd coat would “smooth over” the 1st, but of course now it’s more coarse than the surface of the closet door itself.

    Wondering if you have any “quick fix” recommendations to sand or smooth over it somehow? Appreciate any advice I could get. Thanks!

    Reply
  2. Stephanie
    Stephanie says:

    I’m in the midst of converting a pocket door into our “family hideaway chalkboard command center” (that’s a mouthful). What did you use for the calendar outline? I was thinking of using a sharpie paint pen… suggestions?

    Reply
  3. Rose
    Rose says:

    Hello! This is great and thank you for share! I made one in my home but I am wondering if it would resist the use of liquid chalk markers, have you tried using them?

    Reply
  4. Brooke D.
    Brooke D. says:

    Love this!!! And so needed! I am about to try this on an old fireplace that has been boarded up. Wish me luck!

    Reply
  5. Chanel Zukowski
    Chanel Zukowski says:

    I just finished my second coat of chalkboard paint on my wall and it seems to be drying shiny in some areas. 🙁 The first coat dried dull/chalkboard like…do you think that maybe it’s just not fully dry yet? And if it is…will “priming” the wall with chalk fix it? Thank you!

    Reply
    • Brittany Bailey
      Brittany Bailey says:

      Chanel, it shouldn’t be shiny. Try lightly sanding the surface, then stir your chalkboard paint and paint another coat. Then you can season the chalkboard by rubbing chalk on it’s side over the chalkboard and wipe it off with a dry rag before using it.

      Reply
  6. Ray
    Ray says:

    Is it okay to cut the sheet, paint it and than nail it on the wall? I am trying to avoid to paint the panel/wall inside the kitchen and prefer to do it in the garage.

    Reply
  7. Ronnie
    Ronnie says:

    I just bought 2 panels of Masonite for this project. I was so excited to go drive 40mins for the cloest Lowes from my house. Well, I did not tie it well enough on the top of my SUV. So once I left Lowes. They just flew right off and got torn about 8 inches…… I was so stupid! Anyway, I have no idea how to fix it or I should cut off the torn part and use some scarp piece to fill up the length of the wall. I don’t want to glue the sheet on the drywall. I know I will take it down in the future. What kind of finish nails did you use? Some people said Masonite is easy to get bucking and nail popping. Do you have those problem yet?

    Reply
    • Brittany Bailey
      Brittany Bailey says:

      Oh no Ronnie, that sounds like a nightmare. Can you cut them down into squares or rectangles and create some type of gallery with them instead of trying to piece them together on the wall? I just used 1.5″ finish nails in my nailgun. No problems with anything popping, but remember I used construction adhesive.

      Reply
  8. Sieglinde
    Sieglinde says:

    Hi there –
    I am in the midst of painting my chalkboard, with a foam roller, and it is leaving a small bit of texture….I have yet to sand it before the 2nd coat, but just had to ask if that was normal? It isn’t a huge texture, just the kind you get I think from using a foam roller….
    Any thoughts would be appreciated 😉

    Reply
    • Brittany Bailey
      Brittany Bailey says:

      Sieglinde (love your name by the way), You should be okay, just sand after the first coat dries. Paint the second coat and you might want to lightly sand after that coat. I’m also wondering if you have enough paint on the roller? Or too much?

      Reply
  9. Staci Torgerson
    Staci Torgerson says:

    Love your blog as well as all the great, lots of directions, explanations, resources and photos you use with each tutorial. Thanks for not assuming everyone knows everything. You are great.

    QUESTION: We just bought a 30 yr old home that has the dreaded….popcorn ceilings. The ceiling height is only 8′ and we are trying to decide the best way to eliminate the popcorn. Either scrape by wetting or dry sanding or covering it with beadboard or ripping it all out and putting up new. When I saw your wall I was curious if you thought it would hold up for ceilings….installed upside down. What do you think and what wpuld hou do? There’s over 2500sq ft of it in the house.

    Reply

Trackbacks & Pingbacks

  1. […] create this quick chalkboard calendar you need to start with a chalkboard wall (or large […]

  2. […] Season your chalkboard and start writing messages. […]

« Older Comments

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.