, , , ,

How to Create Rope Light Word Wall Art

how to create a rope light word wall art sign

I really appreciate all your kind comments about my arts and craft studio. Don’t forget to enter to win the Flow Wall organizational system, the giveaway ends Wednesday, Nov. 21st at midnight EST.

The boys and I christened the art & craft studio yesterday by creating ornaments. We had creative clutter strewn everywhere! It was wonderful to be able to spread out and not stress too much about the mess (although I did end up cleaning up and vacuuming last night.) But enough about that, what you really want to know is how to create your own rope light art sign. The possibilities of words are endless. I bet your child would love to have their own name in lights!

The germination of the light sign came from this installation I did at the Habitat house I worked on with GMC.

I installed air hose on the wall in their living room. Ever since that success, I’d been dreaming of having my own wall sign art. I looked for inexpensive air hose, but couldn’t find any locally. That’s when I decided to use LED rope lighting instead. It wasn’t cheap, but I’m so glad I went for it because this unique art installation is bright, cheery and really gets our creative light bulbs primed.

Creating a rope light sign is a relatively easy process, but you must have a helper (or have four arms).

 

Materials:

  • Cool White 50 Feet LED Rope Light
  • Rope cap (usually included with rope light)
  • Hanging clips for rope light (also usually included with the rope light)
  • Hand weights/sand bags or anything to weigh down the rope light
  • Velcro indoor/outdoor multi-clips
  • Drill with philips screwdriver bit
  • Painter’s tape
  • Level and/or laser level
  • Chalk
  • Scissors
  • Helper

A quick note about rope lights. I bought 50′ of rope light, and ended up using about 45′. The word “Create” takes up 10′ and 13′ to the end of the squiggly line. This is the rope light I bought. I chose the LED version because it won’t get hot and it doesn’t use up much energy. As a side note, the rope light I used on the back of my son’s bookcase really stunk from the heat for a while. I didn’t want to have to smell that smell again for several months. After a while it will stop giving off an odor. I also knew from that previous experience that I wanted a truer white light. The regular rope lights have a yellow cast. The LED is a brighter whiter color, although it does have a slight bluish cast, I prefer it to the other. Finally, the LED rope light I bought can be cut down at certain spots, making it more flexible for my project.

 

Instructions:

Open up the LED rope light box. Plug the rope light in to make sure it works properly. Also check the box to make sure that installation clips are included. If not, you may have to purchase some separately.

Attach the laser level to the wall and create a level baseline for your word.

Sketch out the word using chalk on the wall. Make sure you don’t have tight angles in your word. The rope light will curve and bend, but can’t make sharp angles.

Configure the rope light on the floor in front of your wall. Place weights onto the rope to keep the letters in line. Make any adjustments to the sign.

Measure the excess lighting not needed. Measure that amount from the side that the plug ISN’T on. Look closely at the rope light and find the closest cut mark (shown with the scissors sign.) Cut the excess off the rope.

Cap off the end of the rope with the end cap provided. For exterior application, use a weather tight glue. For interior use, you can just slide the cap on.

Transfer your rope straight up from the floor to the wall. Have your helper form the first letter on the wall (using the chalk sketch as a guideline.) Stand back and make any adjustments to the position.

Attach one clip to the wall. (We used the provided screw in clips for most of the installation.)

Work out one letter at a time. Use painter’s tape to help hold the letters in place while you attach the clips.

When two ropes ran next to each other (like in the letter “t”), we used the velcro multi-clips which have two notches for the rope lights.

Continue on until you reach the end of your word.

Stand back and admire your inspiring art installation. Give your helper a high five and celebratory hug. (Thank you Holly for all your help!)

Plan how you want to finish off your word. For my installation, it seemed fitting to end with a flourish! But, you can run a straight line. I also thought about hiding any excess with white tape painted the same color as the wall, but I didn’t need to do that since my rope light runs down behind the Flow Wall cabinets to a plug.

I really appreciate the extra light our new sign brings into the space. It truly cheers me up whenever I plug it in.

And it doesn’t take long for the little artists to be drawn to the art and craft room like moths to a flame. (Ha, ha. Pun intended.)

Isn’t my little guy a budding Picasso? I’m so proud of his creativity and his visual accuracy at age six. I think he gets it from his Momma. 😉

I hope you have a fabulous week! Don’t forget to take some time off and get creative.

 

31 replies
Newer Comments »
  1. Jenn
    Jenn says:

    Gorgeous. I think I found a new project for my husband (lucky him). My daughter’s walls are hot pink, and my son’s are lime green… white LED rope light lettering would stand out quite nicely, don’t you think?

    Reply
  2. Erin Kaven
    Erin Kaven says:

    Thinking of doing this on a thin painted plywood and hanging on a wall in front of the house for Christmas. Thanks for another great idea.

    Reply

Trackbacks & Pingbacks

  1. […] it up requires a little work, and some help from an assistant, but it isn’t too difficult. Check out this extensive online tutorial by PrettyHandyGirl  for instructions. You could use a similar method for words made out of fairy lights or Christmas lights, but the […]

  2. […] My boys come in the studio and immediately turn on the sign and get creative. You know there’s a tutorial for creating your own rope light message sign. […]

  3. […] How to Create Rope Light Word Wall Art This project is kind of like creating your own neon sign to motivate you every time you see it. […]

  4. […] How to Create Rope Light Word Wall Art This project is kind of like creating your own neon sign to motivate you every time you see it. […]

  5. Tuzew Blog says:

    Lighting Rope…

    […] ox to make sure that installation clips are included. If not, you may have to pu […]…

  6. […] 3. How to Make a Rope Light Sign […]

Newer Comments »

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.