, , ,

Creating Minnow Trap Light Pendants

On our last trip to the beach, I stopped in a hole-in-the-wall thrift shop. The store was musty, dirty and reeked of old cigarette butts. I’m still not sure why I was drawn into this store. But low and behold, this is what I found!

The owner told me it was a minnow trap. Duh, of course it is! Actually, I’m not a fisherperson, so I never would have guessed that.

What I did see was two pendant lamps for my screened porch. I have been trying to decorate it for a year, but I have been unable to find some inexpensive porch furniture. Regardless, I am aiming for a breezy ocean theme, so these would fit in perfectly!

I separated the trap into two pieces. Then cleaned them with a damp rag.

To create the light kit frame, I used these tools:

I bent a small hook in the clothes hanger with the needle-nosed pliers. Then fed the end of the coat hanger through one top edge of the minnow trap.

 

Using my pliers, I pinched the hook shut.

If you pretend that the first hook was attached at 12 o’ clock, then you want to attach the second hook at 3 o’clock.

Using my pliers again, I bent both wires near the center into a 90 degree “L” shape.

 

Next, I wove the other L hook (over and then under) the first hanger and bent the wires until they overlapped at 6 o’ clock and the second one at 9 o’ clock. I played with the wires until I was able to create a small hole in the center.

I ended up with this on both traps (now looking more like lamp shades):

 

I sprayed my two lamp shades with an automotive primer (I read somewhere that it has better adhesion to metal) and followed up with 2 – 3 coats of Oil Rubbed Bronze spray paint.

For the light sockets, I purchased 2 candelabra base kits from Lowe’s.

I simply inserted the socket and light bulb underneath the coat hangers. Then bent the coat hangers while making sure to get the light kit centered in the shade.

When I got everything centered, I fed the unattached ends of the coat hangers through the shade and hooked it around securing it to the wire shade.

Then all I had to do was screw in these cool iron shelf brackets into the wall on my porch and feed the wires of my lamps through and use a twisty tie to secure it.

Now we have some unique mood lighting on our porch!

 
 

Do you like? Would you have known that they were minnow traps?

Too bad the weather is turning cool again. Maybe I can find some deals on porch furniture now!

Copy Me Challenge

51 replies
« Older Comments

Trackbacks & Pingbacks

  1. […] you love to fish or not, these Minnow Trap Light Pendants are a great DIY option. They look great, give a lot of light, and set a casual […]

  2. […] A great place to start adding metal touches to your home is with lighting.  There are some wonderful industrial fixtures available that will add just the right touch…     Maybe you can’t afford a new fixture right now?  Update your old one with a metal basket… […]

  3. […] refinished and saved from the trash heap. For example: Ladder Display Shelves, Beachy Coffee Table, Minnow Trap Lights, Bamboo Painted Rug, Dream Big Butterfly Window, and my Garden Bench. My budget for this makeover […]

  4. […] the porch with fixtures and accessories like: Ladder Display Shelves, Beachy Coffee Table,  Minnow Trap Lights, Bamboo Painted Rug, Dream Big Butterfly Window, and my Garden Bench. My budget for this makeover […]

  5. […] minnow trap hanging pendant lights up my treasures on the […]

« Older Comments

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.