, , , , , ,

Adding Wallpaper for Windows to Stop the Peep Show

I’m about to share something a little embarrassing with the whole world. I confess to you that I regularly walk in my bathroom naked in front of the only window in our master bathroom!

Why would I do such a silly thing? Why? Well, I’m not intentionally trying to flash the world, that is for sure! I do it because I don’t want to cover that window that provides light and a view of our wooded backyard. I like to watch hawks, deer and other wildlife as they cross behind our yard. During the spring, summer, and fall I have plenty of privacy from the trees. BUT, in the winter that privacy is nearly nonexistent.

Now, I’m not insinuating that my neighbors are the peeping tom types, but I still feel a little self-conscious getting out of the shower at night in a brightly lit bathroom.Dear Mr. & Mrs. Jones (not their real names), if I inadvertently flashed you on one such night, I’m sorry.

When Wallpaper for Windows contacted me to ask if I wanted to try their product, I immediately said, YES! The name of their company is slightly misleading, because they sell a wide range of privacy films and decor clings for more than just your windows. You can find products in their online store for glass shower stalls, mirrors, side lights, and more.

I was instantly drawn to the decor tint line. The decor tints are sold in privacy and see-thru opaquenesses. With a variety of  11 colors to choose from, I knew I could find one to work with our blue bathroom. Ultimately I chose the sky blue see-thru film.

Why not privacy you ask? Well, here’s the thing, I didn’t want to block my view of the wildlife (and the kids playing in the yard), but I did want to keep my neighbors from thinking that I lead a wild life.

How to Install Wallpaper for Windows Window Clings

Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

  • Razor blade
  • Window cleaner
  • Water and soap mixed in a spray bottle (the Shaklee Basic H2 works for both cleaning and spraying)
  • Clean rag
  • Pencil
  • Ruler
  • Scissors (if you don’t have an X-ACTO knife)
  • Wallpaper for Windows film
  • Wallpaper for Windows squeegee

Difficulty: Easy to apply the film; Moderate if cutting shapes

Installing the Window Film

Step. 1 – Start by scraping any debris off your windows using the razor blade. (Confession #2 – that debris you see below is hairspray. Truth be told, I lived through the hair band 80’s and haven’t weaned myself off hairspray yet.)

Step 2. – Clean the windows thoroughly with glass cleaner and wipe dry.

Step 3. Measure each window panel. You may choose to add 1/4″ to the dimensions if you are unsure about your measuring or cutting skills.

Note: Wallpaper for Windows will cut your panels exactly to size (1 flat $6.50 fee for the all the divided lights in my window), but I chose to do it myself. It isn’t hard to cut the film, but you might want to pay to have Wallpaper for Windows cut it if you aren’t practiced at using an X-ACTO knife.

Step 4. – Transfer the measurements to the back of the window film (the white paper side.) Hold the ruler firmly on the back of the film and cut your panels.

Set the panels aside in a dry spot. Don’t let the paper backing get wet.

Wash your hands thoroughly to remove any oils or dirt. If you don’t, you could leave fingerprints or smudges between the glass and the film.

Step 5. – Wet the window with the water/soap mixture. (I used the Shaklee Basic H2 window cleaner.)

Step 6. – Peel the backing off the decor tint film.

Remember how I said not to get the backing wet, here is why:

Those little white spots of backing paper were near impossible to get off.

Step 7. – Position the window film onto your window. You can peel it off and reposition it as needed.

When the film is centered on the window, use your hand to press and smooth it onto the glass.

Step. 8 – Use the provided squeegee (also a credit card will work) to press from the center to the edges of the film. Push any air and water bubbles out to the sides.

Step 9. – Use a sharp X-ACTO blade to trim any excess film from the window.

This is how the see-thru decor tint (blue sky color) looks on the bottom half of the window. You could stop at this point and enjoy the privacy that it creates.

Here is a close up view of the blue sky tint next to the open window:

Cutting a Graphic out of the Window Film

If you’ve been reading my blog for a while, you know I’m the blogger who likes to push that “Amp Up the Creativity” button on all my projects. Which is why I wanted to cut graphic shapes out of the decor tint.

Step 1. Install the window film (see directions above). Let the window and film dry completely before moving on to the next step.

Install a fresh blade into the X-ACTO knife.

Step 2. – Use a sharp X-ACTO blade to lightly cut through the film. Use enough pressure to cut through the film but not to scratch the glass.

Step 3. – Use the X-ACTO point to pull a corner free. Peel the shape off the window.

Continue until you have completed the scene. I cut out simple graphic trees from the window film.

In the late afternoon, the sun shines through the cut-outs and projects this beautiful scene on the opposite wall.

And now I have the perfect amount of privacy and yet can still see wildlife and wild boys in the backyard.

The closer I get to the window, the more I can see out the cut outs:

However, as you can see, there is still enough of the film to protect my neighbors from seeing more than they bargained for.

If the tinted decor film isn’t your style, they have a plethora of other films to choose from!

Disclosure:  I was not paid or compensated to write this post. Wallpaper for Windows sent me a complimentary sample of their product to test. This post is my idea and my thoughts on their product. I was not told what to write.
113 replies
« Older Comments
  1. Davona Parisher
    Davona Parisher says:

    FYI – If you are looking for the frosted look and plan on cutting out a design, clear contact paper works the exact same way. Clear contact paper is frosted and doesn’t require nearly as much prep work.

    Reply
  2. Carol
    Carol says:

    These posts have given me the confidence to take on this DIY project—Thanks!
    Tackling a bathroom window privacy needed–can’t decide if light frost will give the privacy we need. I don’t want to give up light feel in the room with heavy frost. Any thoughts?

    Reply

Trackbacks & Pingbacks

  1. […] want privacy, but still have light come in, check out this DIY privacy film? It is a wonderful way to cover your windows but still let the light come […]

« Older Comments

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.