, , ,

Guest Post – Building Under the Sink Storage by Pink Toes and Power Tools

I am very excited to welcome Kristen from Pink Toes and Power Tools today! She’s gonna kill me for this, but this is Kristen:

I am not trying to embarrass her, I just want you to see what a fun gal she is! And not only is she fun, she’s got some serious DIY talent! You should see her daughter’s bed that she made!

Please give Kristen a warm welcome today!

Hello Pretty Handy Girl readers! I am Kristen from Pink Toes and Power Tools and I am honored to be guest posting today here at PHG!

At Pink Toes and Power Tools, you will get DIY instruction and inspiration in home remodeling and decorating, with an emphasis on woodworking. The projects on my blog are all done by me. I’m 5’2″ tall and 115 pounds. In short (pun intended), if I can do it then you can too!”

I was a seasoned DIYer in sewing and interior painting prior to beginning my blog, but I was a complete newbie in woodworking. Learn along with me as I tackle my first project, a Storage Closet Organizer, which gave me the confidence to build some Leaning Wall Shelves, which eventually led to an entirely new entrance to my home (which is also the laundry room):

With the new year rolling over just recently, I made a resolution to get some organization back into some hidden areas of our home. So today I am going to show you how you can build some under the sink storage, because I was tired of opening the door and looking at this:

I wish I could tell you that I “staged” it to look this bad, but unfortunately that isn’t the case. Some of you may still think that I did and for that I thank you — that means somebody out there believes I’m just not this messy. My husband sure wishes that were so! You can now understand that when I saw this on Pinterest I got pretty excited.

image

source: Pregnant…with power tools

Actually I got a LOT excited…dollar store bins! Scrap wood! Cheap and easy DIY—what’s not to love??

So I went off and I built some stuff and now it looks like this:

I love it so much now!

First thing you need to do is go get yourself some bins. This project cost me $4 because all I had to buy were the bins and I got 2 for $1 at Dollar Tree. You also need to know that bins vary in quality and usability for this project. Look for rigid bins with side edges that are uniform with no obstructions like these:

Mine looked decent in the 2 pack

…but revealed their true colors when I separated them.

Oh well, no worries. I decided to make these work because they were the only options at Dollar Tree that were the right size (these are about 6.25×10) . I modified my runners from the inspiration photo by using two for each side. You would want to do that if your bins are wonky like mine, or you want the bin to not tilt forward as you pull it toward you to open it.

I’ll give you the instructions using my dimensions — modify yours to work with your bins and cabinet space or to use up the scraps that you have available.

For the plastic bin tower you need:

3/4″ plywood–2 @ 9.5 x 19.75 (sides)

1/2″ plywood–2 @ 8 9/16 x 9.5 (top and bottom–I pieces together mine with multiple scraps for each)

1/2″ mdf/ply–16 @ 2 x 9.5 (runners)

1/4″ ply–8 9/16 x 20 11/16

8 bins 6.25 x 10

First you attach the runners. I did this one by one using a bin to space them and make sure it didn’t bind at any point. Turns out as I measure them now, they are all almost exactly 1/4″ wide. Glue and nail with 1″ 18 gauge nails or countersink some screws.

IMG_5642

Here I am figuring out how wide to cut the top and bottom. I think these would slide better if I had put them a little closer together, but I didn’t want to risk them binding. Glue and nail/screw on your top and bottom piece. I just put one nail on each corner of the top and bottom at this point (makes it easier to square it up). Put it on its face, square it up, nail on the back, and add some more nails or screws to the top and bottom.

IMG_5643

Done!

The drawers do not slide perfectly–if you want drawers that do, you have got to get rigid bins with a decent lip on the side like I said before. For $4, I am more than thrilled with these.

The other components for this project are super easy but you’ve got to be careful. This whole unit won’t fit in the cabinet wall to wall if it is all attached together. If you are strategic you can get them in there and remove them later.

Add a scrap wood bin with felt on the bottom for easy gliding so you can reach into the back recesses and you are good to go!

It looks like I threw out a lot of stuff, but honestly what I got rid of would have fit in half of one of the plastic drawers. Ok, maybe three-quarters of one if you count half empty boxes and miscellaneous plastic bags.

What do you think of it? Have you got a place for one of these in your home?

Thanks again for having me here Brittany!

{clapping hands}

Thanks for that wonderful tutorial Kristen! If you would like more DIY tutorials and fun, head over to Pink Toes and Power Tools! And tell her I sent you!

Would you like to be a guest on Pretty Handy Girl? Read my open invitation here.

26 replies
« Older Comments
  1. wisconsin dragonfly
    wisconsin dragonfly says:

    So need these and believe I could make them BUT I don’t have the appropriate uniform! LOL Seriously, will be making these for 2 bathrooms.

    Reply
  2. Dilon
    Dilon says:

    Hello dear,

    I gone through this blog and wish to apply for guest post. The article that I will send you which is very helpful to visitors. If you could give me one chance to showcase my article, I will be very thankful to you.

    Waiting for your reply.

    Reply

Trackbacks & Pingbacks

  1. […] Guest Post – Building Under the Sink Storage by Pink Toes …. Jan 24, 2012 – So today I am going to show you how you can build some under the sink storage, because I was tired of opening the door and looking at this:. […]

  2. […] 17. What a great tutorial for this DIY under the sink storage! […]

  3. […] Using dollar store baskets, build a handy slide-out drawer system for various bathroom toiletries and supplies!- Source […]

  4. […] Using dollar store baskets, build a handy slide-out drawer system for various bathroom toiletries and supplies!- Source […]

« Older Comments

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.