We’ve moved several times and each time I’ve packed one special tree branch with us. I have had this branch so long that I can’t remember where I found it. I do know that I picked it up on one of our camping trips. Whether it was Yellowstone, Acadia, Nova Scotia or somewhere else I’ll never know. What I do know is that I kept it because I thought I could do something really special with it someday. Well, that day has arrived. I decided to turn the branch into a towel bar for my sons’ bathroom.
- Tree branch stripped of bark and branches
- Coping saw or other hand saw
- Sandpaper (80, 120, & 180 grits)
- Power sander
- Dust mask
- Safety glasses
Start by sawing off any nubs, knots and sticks using a coping saw.
Pull out the sandpaper and power sander. 3M just sent me these color coded sandpaper sheets. I think the idea of color coding them is brilliant! It really helps you grab the right grit quickly. I give them two gloved thumbs up.
Stack your sandpaper sheets. Lay the sander along one edge of the papers and trace a line along the edge of the sander with a pencil. Be sure to leave excess on both ends to attach under the clips of your sander.
Cut the papers along the pencil line.
Load all three pieces of sandpaper into the sander (if possible). The coarsest grit (80 grit) should be on the outside, followed by the 120 grit and finally the 180 grit sandpaper.
Now you are ready to start sanding!
Here is a video tutorial on sanding the branch down. I’ve upped my level of professionalism, so I hope you enjoy my efforts.
Coming up next. Installing and finishing the branch towel bar.
Just a teeny little reminder: Don’t forget to enter the giveaway to win a brand name sofa slipcover (think of the initials PB & J, minus the J) from UglySofa.com. Three winners will be chosen at the end of the day, Wednesday, August 31st. I just love that I get to choose three winners instead of just one. Good luck y’all!