Fork Photo Holder Base

Hey ho, what do you know?! I know that there is an exciting tutorial waiting for you over at my friend Gina’s who writes The Shabby Chic Cottage! Wanna see?

Here it is!

Fork Photo Holder

Fork Photo Holder

I am guest posting over there today. I hope you enjoy the tutorial.

I did want to share with you how to make an alternate base for that Fork Photo Holder. So, if you will give me a few minutes, I’ll show you how to do that.

Materials:
Fork (.25 each from Goodwill)
Wooden base from craft store (cost me .69 each)
Beads, corks, or other items to thread onto the base of your wire (corks were free, beads I had on hand)
Scrapbook paper
Mod Podge
Multi-Purpose Utility Wire 16 Gauge ($7.99 for a huge roll of it, I only used a few inches per project)
Wire cutters
Needle-nosed pliers
E-6000 glue
Felt
Drill with 1/16″ drill bit

 

Instructions:

Start by sanding any rough edges off your wooden base. Then prime and paint them.

Measure and mark the center of your wooden base.

Using your 1/16″ drill bit, drill through your base (be sure to put a piece of scrap wood underneath to avoid drilling into your table, etc.)

Lay a piece of scrapbook paper on top of the base and use your finger to score around the edges of the base.

Cut out the shape scored on the scrapbook paper.

Using mod podge, brush one coat onto the top of the wooden base. Lay your scrapbook paper cutout onto the base and follow up with another coat of the mod podge to seal the paper to the base.

Assemble your fork onto the wire as shown HERE.

Thread on your beads for the base. (Alternatively, you can use a wine cork or a solid end bead and drill a hole through them.)

Then dip the end of your wire into the E-6000.

And insert it into the base. Some of the glue should squeeze out of the base. You can use the excess glue to adhere the beads to the base. (Yes, you should wear gloves when working with E-6000 glue. Do as I say, not as I do!)

Protect your table with newspaper, craft paper, or wax paper while the glue dries.

Using a sliver of soap, draw around the base of your photo holder onto the felt.

Cut the felt slightly smaller than the traced shape.

Use a little E-6000 to glue the felt to the bottom of the base. Let it dry on wax paper (I use old cereal bags because they were free and I like to recycle.)

And you are done!

I raided my neighbor’s recycling bin for that beautiful cobalt blue wine bottle. It works well as a base too! Don’t you think it would be a cute place to hold “Today’s Specials” at a restaurant? Or a reminder note. Or just a beloved photo.

What would you use one of my fork photo holders for?

PHGFancySign

Comments

  1. Wow… who knew! That is truely an awesome idea. I might have to try this one :)

  2. Cute!

  3. well now that is a cute idea! Perfect thing for all those pretty forks I see that the thrift stores and great gifts too!

  4. How cute are these?! Esp like the blue wine bottle.

    nataliemack.blogspot.com

  5. What great photo holders! I think that wine bottle holder would also be great to put a recipe card in on the kitchen counter. Or maybe your weekly menu, grocery list, “I love you” notes, or just about anything you want to stand out!

  6. I love it! I bought some old silverware at a garage sale Saturday, so maybe I will try to make something similar! Thanks for sharing!

  7. Really great site! I’m glad I found your site. Nice idea for a holder. Very classy yet so simple to make. I’ll be back to read more.

  8. wow, very cool!

  9. Love the wine bottle, would work great as a table marker at a wedding reception.

  10. That is just the friggin cutest thing like, EVER. I am so making these. Thanks.
    Tess

  11. Where did you buy the wire? I attempted to make them but they would not stand up on their own, my wire was not study enough.

  12. Wow, so creative! Wonderful idea!

  13. Wow…so crafty clever. Love it. :)

  14. Melody says:

    In the process of making 12 for a preschool project for mothers day…letting them mod podge 3x3x3 blocks…then we drill, etc. What kind of wire did you use? Can’t find any at Hobby Lobby strong enough!!

  15. Great idea! Can’t wait to get started. :)

Trackbacks

  1. [...] I bought a bunch of silverware (err, excuse me flatware) from Goodwill recently. I made some Fork Photo Holders (which I absolutely adore!) And had been thinking of some cool projects to do with the [...]

  2. [...] you seen these fork photo holders over at Pretty Handy Girl?  Brittany did such a fantastic job at taking an everyday item and turning it into something [...]

  3. [...] #109 Fork Photo Holder from Pretty Handy Girl [...]

  4. [...] Que tal usar garfos para montar um display de fotos super original e cheio de estilo? A ideia é de uma blogueira americana chamada Brittany que adora inventar projetos DIY. Vai lá! [...]

  5. [...] prettyhandygirl.com via Reincarnations on [...]

Add Comment Register



Speak Your Mind

*